Embossing Presses

Description

EMBOSSING PLATEN PRESS WITH MONOLITHIC STRUCTURE

FLAMAR MODEL PM SERIES

• Enbloc structure composed by sheet plate
• Appropriately dimensioned and thermally treated.
• Turned plate pressing piston with reinforcements to limit the flexions and ensure a uniform printing
• Wide slot between the two plates to facilitate the introduction of the leather
• Wide space between the plate and the side to allow an easy handling of even hide.
• Oleo dynamic system with a variable capacity and constant power pump to obtain at the same time a high speed in getting closer and low installed power
• Pressure controlled by a digital pressure gauge.
• Adjustable contact braking to obtain the maximum contact softness without changing the speed
• Rundown braking with independent and adjustable shock absorbers
• Plate heating by electric resistances which are independent and controlled by some probes to maintain a uniform temperature. every probe is connected to a thermostat to have on the plate different levels of temperature
• Safety device thru a photoelectric barrier (photocells) with fingers protection, which stops the raising of the plate and reversing its movement if hands are entering in the danger area before or during the raising. the raising comand can be thru push button or pedal. the photoelectric barrier is fixed; when plate is going up the photoelectric rays are excluded thanks to a special device connected with the up-movement of the plate itself (patented). the control is a 4 category following the en1035 rules.
• Emergency push button is located under the leather support table in order to be easily reachable with every part of the body
• Electric panel and control box are placed outside the main structure, in a position easy-to-use
• Optional
Double shot
Plc and digital keyboard touch screen control to obtain a wide range of adjustments and pressure plannings, pressing timings, and temperature range.
3 adjustable (from touch screen) buttons, to modify timing and pressure during the operation.
Automatic hooks for the fixing of the plate.
Heat exchanger for the oil cooling
Temperature control in 3 transversal points.
Temperature control in 5 points (2 transversal, 3 longitudinal)